99% High Purification Multistage Distillation System Short Path Distillation Equipment
Multistage Distillation System Design
Different from the traditional wiped film evaporator design, the condenser is located inside the short path evaporator body.
Multistage Distillation System Operation
Feed liquid is admitted into still under high vacuum, immediately spread into a very thin film and forced quickly down the evaporation surface. Heated walls and high vacuum drive the more volatile components (distillate) to the external condenser as the less volatile components (residue) continue down the cylinder. The resulting fractions, thus separated, exit through individual discharge outlets. Depending on application, the desired product is either the distillate or the residue fraction. Small amounts of condensable low MW compounds collect in cold trap upstream of vacuum system. For high solvent loads, an optional external condenser may be installed immediately downstream of the still.
Multistage Distillation System Description
| TYPE |
DZL-10 Laboratory Vacuum Distillation Equipment |
| MATERIAL |
stainless steel 316 |
| TEMPERATURE |
Room temp~260 ℃( (Electric heating included ) |
| DIAMETER |
100 (mm) |
| HEAT EXCHANGER SURFACE |
0.12 (m2) |
| INNER CONDENSING SURFACE |
0.2 (m2) |
| FEED AMOUNT |
4000~8000( ml/h) hemp oil |
| ROTATION SPEED |
80-415rpm |
| COLD TRAP |
Liquid nitrogen/ stainless steel 304 |
| FLOOR AREA |
length*width*height=3000*500*1800 (mm)(without pump) |
| POWER |
4.5KW (without pump) |
| VOLTAGE |
220V (we offer voltage transformer) |
Multistage Distillation System Features
1. Material feeding system:
- Feed tank: 50L jacketed glass tank.
- High precision metering pump feeding (1-10L/H)hemp oil.
2. Short path evaporator:
- Material (contact with products): S304 stainless steel.
- Evaporator surface: 0.12M2.
Product Tags:
|
|
99% High Purification Multistage Distillation System Short Path Distillation Equipment Images
|
